Great replacement opener. Looks like the original one I had with my Chamberlain opener, obviously without the logo. Feels a little cheap but for the price what can you expect. Setup and pairing was a breeze and now I have 2 new working openers. No brainer!

At 1/3 the price of the over head door company price, this was a no brainer. We bought extra to have for guests when they come so they can come in and out the garage without giving them a code to the door. Easy to program and I had them both up and working in less than 5 minutes.

Thinner than my existing remotes, which is a positive. Easy to program, set up both in less than 2 minutes. Find color code on opener, hold left most two buttons on a remote until light is solid red. Press right button the number of times to match the color code. Press different button once. Last press program button on your garage door opener, hold button on remote. Garage door opener should flash. Both worked with no issues.

Works great. Easy to program. Only con is the clip is very hard to install

Wow. It took me 15 seconds to program the remote. Using it for a lift master with purple learn button. Works as advertised. Highly recommended.

Easy to follow directions, set up all three in a couple minutes. Have about the same range as the OEM. Good bargain.

They were easy to program and now work perfectly with my liftmaster garage door. The range is good. They are a good size to put in the car or in a small purse. Seem to be of good quality so far.

The remotes worked just fine with a new LiftMaster 84504R opener. The only issue I had was that step 1 said to look at the opener's learn button color. I followed the steps and could not get it to work. I found if I added a "Step 0", it worked, with the "Step 0" being pressing the learn button and having the opener led blinking (I actually used the learn button on the wall controls). If I started the process with this Step 0, all worked fine. A great value at about $6 each.

I was a bit weary because of the reviews talking about the problems with connecting more than one door - but decided I'd give it a go. Glad I did. It works well and the setup was easy. There is only one thing in the instructions I find confusing. First they describe how to teach the remote to send the signal matching your door opener - click this many times on the button for that colour of the button on your opener - this is all crystal clear, steps 1-4 in the printed instructions. So at that point you have the remote programmed and it will work as if you got the remote dedicated to your opener. Now your opener needs to learn to obey your new remote. Simple process - first press the Learn button on the opener, and within thirty second or so press the button on your remote. Easy - and written clearly on my opener, and probably most of them. This is the final step 5 in the printed instructions and it is where there is some ambiguity. it says: "Press the learn button on the back of the opener, after the learn LED glow steadily, press and hold the remote button..." This "after the learn LED glow steadily" just says that your click will be acknowledged by the LED going on. If you take it to mean press the button and hold until the LED glows steadily - it is still strictly speaking correct, as the LED will go on right away. The video instruction are even more suggestive - the "Make sure the LED stays on" caption is shown and the motion of the video is paused for a second, presumably to give you a moment to read it. So what is the problem here? Well, if you just reach for your learn button by stretching yourself from the ground - you may not see the LED going on. And if you keep holding the button for long enough - 6 seconds or whatever your opener says - you will erase all info, disconnecting all previously connected remotes. I recommend this product. It is a solid device, and a good value. I also recommend the vendor to change the instructions for the step 5 to read "Press the learn button on the back of the opener BRIEFLY. The learn LED will glow steadily. Press and hold the remote button..."

Works better than my original opener. Range is again better than my original opener and was easy to program. Hopefully it last!

Liftmasterの87504-267Door Openerに使用しましたが、3つのスイッチの内一番右のスイッチだけが登録可能でした。 一番大きな左側スイッチは登録できませんでした。 一台しか登録不要なので、使用には問題ありませんが。

Works well and easy to set up

It only takes 30 seconds to program and works beautifully. We have a quite long driveway and it works long range.