This camera has very great image quality, is easy to use and install, and the motion sensor works way better than other cameras I had before. I love the emergency response service and also that the camera doesn’t need to be attached to a cable 100% of the time. When the battery is ending, I receive an email informing me I need to put it on charge. I love that too because I don’t have to be constantly worried if the camera is charged or not. I think it’s a very good camera for indoors or outdoors. I use mine indoors, and it is doing the job perfectly.

The picture quality on this camera is way better than my more expensive set that I have. Not to mention, this was so much easier to setup and even the app was an easy setup. I have this on my garage facing my cars as the other cameras I have were not able to get a wifi connection from that area. With this camera, I was able to get a better wifi connection. I get alerted anytime that there is movement. I'm able to see things in real time with absolutely no delay either. The light that turns on is bright enough to literally see anything and everything around my cars, which is really good. The picture and playback video quality is almost as good as my television too!

This review is for the Arlo Wired Doorbell & Pro 4 Camera since I was trying to integrate them to work together. Overall the cameras are just OK, however there are many issues that caused me to return the camera. The biggest issues are the long lag time that makes the video doorbell almost useless, motion sensing and recording not working consistantly, integration with Smarthings not working correctly with long lag time, and the quality of the cameras of not sensing motion and forgetting settings every night. Pros: * Good Price when on sale for $79 (Doorbell Camera) * Decent video quality (though hard to read a license plate) * Night vision (only in black in white) works well if the IR light does not reflect off an object close to the camera lens. (Doorbell Camera) * Color Night vision (Pro 4 – as long as you enable the internal spotlight) * Motion alert (only motion) will send to Smartthings to be able to trigger lights (via a web connection) * Will ring your wired doorbell * Announces on Google Nests, however there is a delay after the doorbell is pressed * Allows pre canned announcements that the user on the app can send while in a call after the doorbell is pressed. * Allows someone to leave a message after ringing the doorbell * Get email alerts of low battery (Pro 4 camera) Cons: * One of 3 cameras forgets / changes record length time every night to 10 seconds even though the app is set to record for 120 seconds (Pro 4 Camera) * One of 3 cameras will not sense motion most of the time and when it does you have to be very close to the camera (Pro 4 camera) * Cross triggering of recording of motion on one camera to start recording on another camera takes from 2 to 12 seconds and sometimes does not trigger the other camera. * Cross triggering of recoding will not work properly when linked to other cameras to record, setting time limit of recording to motion would not record anything if triggered by another camera * Cross triggering of recording will not work if you mask the recording area on the cameras triggered to record. * Batteries only lasted 4 to 6 days (Pro 4 camera) * Can not use color night vision if you turn off the spotlight. I have motion yard lights that turn on, however you must turn the camera spotlight on (and use camera battery) to see in color. (Pro 4 Camera) * Plan on spending hours to work with customer service. I found the phone number works best during the day. You must look to find the number. * Very long delay, about 13 seconds to get notification on your phone after the doorbell is pressed, and 8 to 14 seconds when trying to talk to someone at your door when they ring the doorbell. That is a 16 to 28 second round trip wait to ask a question. I have gigabit internet and a dedicated wireless router for just the one camera so it is not a bandwidth issue on my side. Customer service told me that they have a typical delay of 5 seconds. * Audio is choppy and drops out often, even with the built-in messages. * Motion sensor only works for the bottom half of the screen. If you aim the camera down to see the step in front of your door, it may not pick up anything from the sidewalk as people enter * No prerecording of what happened before the motion sensor triggers (when it triggers) * Masking of the area you want to record does not work properly. Customer service told me to turn it off to ensure I get more motion sensing. * No way to turn off black and white video at night, even when you have motion lights that turn on. (wired doorbell camera) * Light and the internal IR light will cause bad glares across the video if reflected into the camera lens * Camera will not record when sent “record” from Smartthings. (possibly may work if mask is turned off) then it would take 12 to 29 seconds to start recording (if it starts at all) * No way to turn certain types of alarm notifications on / off for different times of the day to the app while maintain motions sensors and recording. * Android app has some issues such as no way to turn on / off night vision light. You must log in to a web-based control to turn on / off * No direct connection to Smartthings, must rely on the internet and link your account. * Smartthings only gets motion alerts from Arlo, it cannot receive alerts for people, vehicles, packages, animals, etc. * Alarm types in Smartthings do not work properly: (Strobe, Siren and Strobe, Siren) All settings sound the siren and turn the light on. * Can not record locally with an IP based recorder or software like Blue Iris * Must pay a monthly fee to be able to record. * Must pay a higher monthly fee if you want to add another camera to use as a motion sensor so the doorbell will record when someone comes down the sidewalk towards the door. * The Android app needs to be fixed. Originally when I got the camera I could only use iOS (Apple) phone to connect the camera, they have since fixed that, however other features still do not work as of 9 December 2022 Overall, I got this camera to use to integrate with Smarthings, to record on certain events and THIS DOES NOT WORK correctly with Smartthings. You must get other Arlo cameras to trigger the other Arlo cameras to record. You cannot use routines or existing Smartthings sensors to trigger a recording. The motion sensor on the camera is not sensitive enough to cover my sidewalk and driveway, and only the bottom half of the screen is what can be used to sense motion. Never got the cameras working properly, never received follow up support as promised The agent did not understand the problems, nor was able to fix them. the issues are in the hardware and software of the product.

These are good quality cameras with clear picture. Super easy to install and the app works well. The motion detection is quick, sound is great, alarm is great. The motion zones don't always work great and I get motion alerts outside the zones (very annoying on my front cameras that point toward the road). Batteries die quickly if there is a lot of motion, but they charge quickly and easily.

I wanted to replace the previous owner’s camera at the house I bought a few months ago. So I got this one and it is really useful. It’s super easy to set up. And the picture quality is actually really good. I didn’t need to adjust anything. It’s bright, the motion sensor works well and I can afford it.