The printer is extremely heavy so be prepared to have a helper if you need one to lift a large object that has smooth surfaces that weighs about 90 pounds. After three days here is what I have Pros: -Extremely well packaged. They obviously thought about how to get it to your place without damage. -Comes with 4 500M (1/2 normal rolls) rolls of HYPER PLA with RFID. Black, White, Blue Red -Easy to get all the shipping screws out and they are well marked to identify what to take out -Comes with all the tools needed to get going as well use and adjust it later. Nice touch was they come in a tool box -nearly 100% preassembled. Short of connecting cables and connecting tubes, it is assembled -Setup process is painless but it does take 15 minutes or so -You can print without using the Creality Creative Cloud using direct LAN/WIFI or USB -FREAKING FAST! This is fast and really good quality. It amazes me how far speed has come in the last 5 years. -Great quality out of the box. -I can't say I have ever had another printer that just worked with messing around out of the box. This one just works. Cons: -Heavy make sure you have help and a sturdy table for this beast -Printer instructions are lacking, but they give a QR code to go to a setup video -You do need to bind it to the Creality Creative Cloud to complete setup. I wish it were 100% offline or LAN, but it is what everyone is doing now. -No included "poop" can for catching the purge for color changes. Plenty of designs on the web however. Three days in and I am happy. I will update if there is something to update. I am learning how to color prints now, so that is something that you may have to learn, but this makes learning fun because you can see the results pretty quickly, good or bad. Remember that sometimes the best inventions are mistakes, so that object that didn't go to your original plan may turn out to be the one you always wanted to print.

Received a few days after ordering with nothing broken and it works as expected. Good print quality and easy to assemble. Bit of a learning curve getting used to Creality print(not hard or bad, just a little different) and some machine specific functionality and settings. I really like the bed size, cfs, and general build/functionality. Overall I’m happy with the purchase.

Play Video I received my printer and let me say up front, unboxing it showed me a machine that looked so promising, I was just itching to let her go. After performing the initial set-up, I set to print my first Benchy. For those not in the know, Benchy is a small tugboat staple used as a sort of "first test print" quite a bit. My first Benchy came out well, with the CFS functioning normally and everything looking good. Excellent! So I tried my second print. I have NOT had a successful second print. My first error was having the CFS continually jam. So I disassembled it, cleaned it out, reconnected it, and then the cutter started jamming. So I disassembled it, cleaned it out, and what do you know - now it jams the CFS again. I tried using Creality PLA, I tried checking online, and just about the only solutions I got were "clean out the debris and try again, Jack." So I did it again and my next error was an inability to extrude. So I manually removed all the PLA from the machine, tried again, and the CFS jammed again. So I disabled the CFS and moved the PLA to the spool. I figured maybe I could at least get a one-color print and see if it can do something, right? Wrong! My new error is abnormal Y-axis movement resistance. The web says "clean the debris out and try lubricating it." How many errors am I supposed to fix on a brand new machine? I have a machine that has produced more unique error codes than it has successful prints. Update: I'm up to ten unique error codes and 1 successful print. I have added a photo of how many errors I've had. I've requested a refund and am sending the product back. I emailed Creality: no answer. I opened the chat window on Creality's website and got a bot - a bot that finally said there was no human to help me. No support. Errors outnumber successful prints. Get anything else. I had an Ender 3 first generation that was less of a buggy piece of junk than this thing. I've paid about $1,600 for a coffee table that has produced one benchy. Buy anything else. There's a higher expected value taking any money you'd spend on this product and putting it on a roulette wheel. Give me my money back, now. Edit: Even sending it back is a pain. Customer service has not answered a single phone call. After five days, I'm tired of sending emails and not being answered. Their website lets you chat with a bot, but no humans will help you. Anyway, boxing it back up for them is yet another bit of your time wasted, since they offer no technical help and your only remedy is sending it back.

This is one of the fastest printers I’ve ever worked with. One thing is the slicer it’s a little bit harder than the other slicers but once you learn the processes it’ll knock the prints out very fast. This print usually takes 1 day 15 hours and about 45 min. As you see in the picture it take 11 hours and change. And the quality of the prints are great.

I had error after error from day one. It was super frustrating. I was worried I made the wrong decision. After reaching out to creality I replaced the throat fan and so far everything has cleared up. This is a beautiful machine, very solid, and great build quality. It prints very fast and the prints look amazing. Customer service was time consuming. Since being in the states communication is very slow and drags to days. It was nerve-wracking at first but I'm beginning to appreciate my purchase and trust it's gonna function and create prints without fail.

Sans soucis, recalibrage evidement obligatoire pour le centre afin de déterminer la hauteur.

produit conforme

Schnelle Lieferung von Super Qualität

Great OEM part, don’t be tempted to buy cheaper ones that look good on the outside, often poor inside and you’ll be in deep stuff very quickly.

Funcionamiento totalmente perfecto, ya que son las boquillas originales no dan ningún problema