I have never had issues will Elegoo filament that werent caused by my own oversight. The filament prints flawlessly and the color always turnout vibrant. It feeds and retracts perfectly through the Creality CFS and prints without issue using the standard generic PLA profile on the K-2 Plus. Elegoo will always be my go to because of its great price and quality, reliable performance.

We purchase this product quite often, for use with a Flashforge Adventurer printer. We have had no problems with the product, the quality is good, the price is good for us. Prints come out clean, and the printed products look good, and hold up well.

Update 10/04/2024: BACK AFTER 1 DAY SHY OF A YEAR! So it turns out the filament wasn't the issue, but was a hot end fan and a power supply fan that were causing the issue. Apparently they were both dying and not cooling the heat sync and/ or power supply adequately. Those were causing intermittant issues with almost all filaments other than one brand that starts with and O. This filament is printing really well currently, and havent had an issue with since doing a major overhaul of my entire hotend assembly and replacing the powersupply fan. 5 Stars for Quality of the filament 5 Stars for quality of the prints with the filament 5 Stars for Elegoo Customer Service (Though they should get 10!) 5 Stars for Elegoo all around from me! ---------------------------------------------------------------------------------------------------------- Update 10/05/23: If I could rate customer service at Elegoo, I would give it 5 stars! Very responsive, and willing to try to get issues taken care of in a timely manner. However, I am settling on a 2 star review of Elegoo's PLA and PLA+. I was sent 2 rolls of their PLA+ to replace the PLA rolls that I purchased, and spent the better part of 2 evenings experiencing the same issues that I originally had with their regular PLA (Under extrusion, clogging, etc.). I even went back and used my filament drier on both of the previously purchased rolls of PLA for 60 hours each, and still am unable to print with them. I love Elegoo, and will always recommend their resin/resin printers, but I can not recommend their filament at this time. I'm going to try to dry out the PLA+ rolls for 80 hours each and see if that makes a difference. Update 09/25/23: Adding 2 stars to my original review. Elegoo customer service was super quick and friendly with a response and reached out to me to offer an option to replace or refund my purchase. I chose to have them replace the rolls, and they stated that they would be sending out their PLA+. Will update review again once I get a chance to test out the new rolls! I bought 2 spools of the black, and printed just fine through half of the first one. Then I started having issues with adhesion, under extrusion, and clogs in my hot end. I was printing at 205C, and leved the bed between each failed print just to rule those 2 factors out. I even tried to increase the temp, but still had print failure after print failure. So I thought maybe the filament had taken on some moisture. I opened the second roll, and the SAME issues developed. I love most other Elegoo products, but would steer clear of this filament for now.

I’ve been 3D printing for several years now and have tested a wide variety of filaments, both good and bad. The Elegoo 4-pack of PLA filament (White, Gray, Black, and Clear) is easily one of the best I’ve used. First off, the packaging is excellent. Each spool comes vacuum-sealed with silica gel packets to keep the filament dry during shipping. I’ve been using this filament with my Flashforge Adventurer 5M, and the results have been outstanding. The filament feeds smoothly, with no tangling or snags, and adheres perfectly to the PEI build plate. The dimensional accuracy is spot-on, which is great for me since I mainly use it for functional prints. I'd also like to note that I’ve experienced zero clogs or jams during printing. I will definitely continue to use PLA from Elegoo.

UPDATED REVIEW: TLDR: 1. BUY ELEGOO FILAMENT. Great prices, great filament, great quality… AFTER DRYING 2. GET A FILAMENT DRYER. Even if filament comes dry, it WILL absorb moisture. EVEN PLA! 3. LEARN BRIMS/MOUSE EARS for anything that is skinny and tall The Elegoo red PLA worked beautifully from day 1, but the blue wasted SO many hours of my time. Stringing like mozzarella, and non-adhesion/falling off mid-print. I dried the blue filament thoroughly (24 hr total), and it works beautifully now. ELEGOO is a GREAT VALUE if you have a filament dryer!!! I started the return process, but I'm keeping it, and I will definitely buy again. Elegoo reached out and offered a full refund, but I declined. On second thought, I deserve pain & suffering compensation, I'm going to ask for that refund. LOL LONG VERSION: 3D printing is a mysterious blend of science and art. When it works, everything has to be JUST so. When it fails, it could be almost anything, and it's not always just one thing that's wrong. My first print was a pre supported Pokemon Charizard that failed 4-5 times in a row, super stringy and supports coming loose early in the print. So I tried printing it using Bambu Lab PLA, and that failed too. Then I knew it wasn't (just) the Elegoo blue PLA. So I washed the Bambu Lab textured PEI plate w/ Dawn, used glue stick, still failed. Then I looked at the long skinny supports w/ tiny brims, and thought "that's not a great idea." I got the same model w/o supports and added tree style slim supports with wider brims, and it printed beautifully w/ Bambu Lab PLA. BUT it still failed w/ Elegoo blue (see mangled Charizard photo). At that point I was so frustrated I left a 1 star review and started the return process with Amazon. I didn't think it was moisture since I didn't see bubbling or hear hissing (but the Bambu Lab fans are LOUD), plus other reviewers said drying only improved prints a little. But I figured, I need a filament dryer anyway, why not try drying it? I used the Sovol 2-spool dryer at 50 °C for 6 hr x 4 sessions w/ just this blue roll in it. Twice when the dryer cooled I had to remove a LOT of condensation. The next two sessions produced no visible condensation, ending at 50 °C at 30% humidity (We're at 65% relative humidity in San Diego currently). ZERO print failures since drying the filament. I've printed the same Charizard, flawless, almost no stringing. I printed a tiny Blue from Netflix's Sea Beast, micro-mini cars that are part of surprise egg sets from Thingiverse. Look at all of that crisp clean detail! (I like to print at 0.08-0.12 mm layer heights for miniatures and variable layer heights for larger models.) The printing is flawless. Removing supports and brims? NOT flawless (freaking PITA), but not Elegoo's fault LOL. I will definitely buy Elegoo again, it's a great bargain. But dry it before using! PREVIOUS REVIEW: I was super excited to discover this 4.5-star PLA filament for such a reasonable price! But try as I might, this filament will not adhere to the print bed, nor will it stick to other layers of itself. There is no evidence of moisture, as there is no audible hissing or popping, no visible bubbling or steaming. It does not string much at all, and where it did adhere, it prints just fine and smooth. See attached photo that shows mangled mouth/jaw, wings, right arm; what isn't showing is that half the supports initially adhered, but later came off the platform. I tried everything: - textured PEI print plate - washed print plate with mild detergent and water - glue stick on print plate - hotend fan on - 220 °C hotend - 65 °C print bed I'm printing this on an almost new Bambu Lab P1P, a very capable, reliable machine that has produced flawless prints using filaments from Bambu Lab, Overture, and TEQstone using a 0.4 mm nozzle and layer heights of 0.08 to 0.2 mm. I am returning these and going to get more expensive PLA filament. My free time is worth more than the savings!

This is a great value for the money, doesn't tangle and has good color. Its durable for parts that i print and prints well at about 70 mm/s speed. the performance is great for the price. I have had zero clogs and its nice that they use carboard spools instead of plastic.

Todo bien en general pero el blanco es un poco transparente comparado don otras marcas y tenemos que mandar más capas o relleno para que no se vea lo que hay detrás, se usó para llaveros y al usar poco material se transparentaba un poco. Fuera de ese detalle el material funciona bien no hace burbujas no se atora en el extrusor...

Genial! es tan bueno que ya hice mi segundo pedido. Lo compre para probarlo y ahora lo quiero como mi filamento principal

Muy bien filamento y bastante económico. Se imprime sin problemas y se pega muy bien a la cama. Le volveré a comprar.

Me gustó mucho. Excelente para mi impresora 3d creality k1 máx. Soporto muy bien las altas velocidades de 250mm/s. Imprimí ese dinosaurio flexible y quedo muy bien. Sin errores

Really high quality! Go for this if you care about print quality.