Just replaced a 20yr old builder installed unit and, WoW, what a difference. This unit a pretty straightforward install. Nice to have the option of running the power through the back or top, by just choosing which knock-out. Attractive and simple. The LED light is adequate and will probably be a nightlight :) 2 speed fan works well, not too loud, especially compared to the old unit it replaced. Only recommendation I might have, would be a grommet included for the knockout. I was worried about the power cord dragging across the sharp edges while installing, but used electrical tape around the opening to protect the wires. Directions were ok, and can be interpreted fairly easily. Highly recommend!

My old vent hood in my old house was ugly to begin with but after I replaced the old range, it stood out even more. My newer range is bright white and this vent looks like it could have come with the range as a set. Looks so much better! I installed it myself. My old range hood was probably 30 or more years old and it was practically frozen in place, so getting it out was the worst part of the install. After that, the rest was easy. I know nothing about wiring so I asked others for advice. It turned out to be very easy. It works great and looks so nice and sleek. I'm really happy I chose this one. First picture is my old stove and vent hood. Second picture is the update.

Needed something to replace my Over the range microwave as it had broken. Did not want to spend the money on another as I was never impressed with its ventilation fan + don't use the microwave much. I needed something that would mount under the cabinet and also would recirculate inside. There isn't any piping installed for outside venting (yet). Chose this Firegas hood model because it checks all the boxes. It filters the smoke and cooking fumes from cooking very well especially since I have it setup for inside recirculation. The LED lights are much brighter than I expected which I love. It comes with different ventilation attachments for various installation types. The activated carbon filter included is a nice bonus. Comes pre-wired for a 110 outlet. 300cfm is enough for my needs. The stainless looks sharp however be mindful to clean fingerprints and grease often. The fan is on the noisier side. Especially on speed 3/the highest mode but you'll never really need it as the suction is more than sufficient for ventilation on speeds 1 and 2. The only complaints I have are that the included instruction manual are a bit vague and the protective film tape was hard to peel off. Take your time and peel it off slowly and you'll be fine. It's been roughly over a month and so far, so good!

The fan works very well and it is not noisy. It actually pulls out the cooking smell from kitchen. It goes well with my stove. The light is not as bright as my old one but I’m satisfied.

This was the most affordable ducted hood fan I could fine that was over 200 CFM. I would not call the install "easy" if someone doesn't have some basic handy skills, but it was managable for my skill level and was compatible with my current duct work (most modern fans seem to have 6in instead of 7in ducts). Fan is quieter and more effective than the antique model we had before.

This is a nice two speed hood for over a stove. The two speeds work nice. The light is a bit on the dim side. It can vent out the back or top or even recirulate the air. I needed to vent out the back. The major drawback is that it does not have an enclosure to make the wire connections in. It has two knockouts to bring power to the underside of the hood. It has an insulated cord from the hood switches and light. There are no strain reliefs for the power cable coming in. There are no wirenuts to make the connection. I mounted a shallow metal box over the connections so they are enclosed. Strain relief added where the power cable comes from the wall. Added a second weather tight strain relief for bringing the wire from the hood into the box. Had to provide my own grounding screw as there was a place on the hood to attach ground but no screw in the packaging. Gather up strain reliefs, wire nuts, grounding screw, metal electrical box before you start!

I like that it came with instructions on how to hang and it was a super simple process to do. We bought it as part of a studio size apartment. Wiring is straight forward and love the led lighting which gives nice lighting. Should be easy to install yourself, but I would definitely still have a second person help. The fan has a vent for indoor in case you don't have an outdoor exhaust. It does have an option for a top vent or wall vent.

Very nice product, price was reasonable. I had my son install this took about 15-20 minutes. So pleased it really makes the kitchen look modern and updated. I am happy that the lighting isn’t too bright!! The fan is powerful but yet not noisy.

I recently installed the FIREGAS Range Hood 30 inch Under Cabinet in my kitchen, and it has been a fantastic addition! The range hood is equipped with a powerful 450 CFM motor that efficiently removes fumes, grease, and odors from the kitchen. The touch screen and gesture control features make it very convenient to operate, and the 3-speed fan allows me to adjust the airflow according to my cooking needs1. The stainless steel construction is durable and easy to clean, and the modern design fits well with my kitchen decor. The LED lights provide excellent illumination, and the delay function is a nice touch for added convenience1.

Shipping was very fast and the range hood has been working perfectly. We love it!

The lights are bright, but not too bright. The fan sound is reasonable and hardly noticeable on 1 or 2. Install was a bit frustrating. There is a QR code to watch a video on the install, but that QR code brings you to a Chinese website that may or may not be a sports page. If you want it to vent from the rear outdoors, which is the reason I bought this, it’s a bit of work to get the metal back panel off. The screws that came with have a head that is just big enough to secure the fan to the wall or cabinet. They should be much bigger, as I added a few of my own. Once installed though, it’s a nice looking product that came with lights, charcoal filter and the option to vent in or outside. I would buy again.

Purchased this as a replacement for a very old, noisy range hood. This one works amazingly! Very quiet, excellent ventilation, sleek modern look that goes with our other appliances. Wish we had purchased this years ago!! Thanks for a great product.

Used at a rental and it gave the kitchen an upgraded and modern look.