I needed a stand for my kick drum mic in the practice space. This stand has a very heavy base making it very stable. It wasn't hard to put together. Plenty of articulation to get in the proper position. No issues with a Shure Beta 52A mic. VEry decent for the price. It comes with two mic thread adapters, one is metal the other is plastic. I used the plastic one with my mic. I would have prefered metal but the plastic is just fine. It tightens down well with minimal movement throughout the whole stand. Good deal for the price.

First of all, fantastically weighted to ensure the mic stays put. This is important when a device is so small, because it would have no way of staying put otherwise if it was not weighted appropriately. The actual build quality is top-notch… Despite it being small, it is built in a professional way with solid metal. I can’t say enough good about it. Please note that there are other mic stands out there that do not have a boom stick… If you don’t need this, I would not recommend this product because it will make the mic less compact , space wise… For me, this was an absolute necessity, and I think it is built appropriately and compact enough for this requirement.

A value selection and holding no surprises from that standpoint, the Innogear mic stand is a solid choice for a tabletop unit. It offers a weighty base for good stability on flat surfaces (it’s non-adjustable for uneven surfaces) with a grippy, non-marring base pad. It’s probably too heavy for a regular travel kit, though the base does unscrew to pack down. It is adjustable via simple dials for height, reach, and boom angle, but the mic attachement point is fixed. A swivel attachement point would be posh, but this is good for basic desktop needs. Materials quality is decent, and should offer a decent service life on a home desktop. For example, the reach adjustment uses a simple threaded bolt to set position, but the boom runs through a plastic sleeve, so the set screw does not contact and scratch or foul the boom arm, which is a nice touch that elevates this beyond cheap, as does the fact all the hardware is black, including pivot bolts and set screw heads. The overall look is good; not stylish, not cheap, just rather basic. I’m using 2 of these for an occasional podcast setup holding Rode NT Mini USB mics, and they do the job. Recommended for basic needs.

Bought this to help with my podcast. We were recording in a hotel lobby and I needed a couple of mic stands for table-top use to take the place of the extending boom arms I usually employ to hold the mics. These weighted stands are very stable and held the mics securely while giving the video portion of the podcast a more professional feel. I managed to slightly chip the finish (my fault) but some quick use of a sharpie covered that right up. I would judge this a good value for the money.

Pros: - Heavy base, very capable of holding microphone with arm fully extended. - Strong hinge. I never experienced any give with the weight of my microphone, the AT2035. - Comfortable locks. Locking mechanisms are easy to tighten and loosen. - Height. Height is adequate for having the stand on a desk. - Feels like it will last -if treated well, of course. - Clean. It looks sleek. I like the turn lock, its minimal looking. - Comes with a microphone holder and screw adapter Cons: - U-clip Fragile. The smaller clip on the top axis broke with little effort. I received the product and I attempted to remove the clip with even force as to not pull it apart. It broke down the middle. I contacted customer service and told them that part broke and if they could send me a replacement part. They shipped me a new replace stand. The clip broke on that one too - on the first try. Perhaps its me, and I dont know how to remove clips. But I think I do, as I have had no problems with the bigger clip. I resorted to using a Velcro strap as visible in the photo. Its not a deal breaker to me as I could get a pack of these, but its a bit disappointing.

This is a great low profile MIc stand for amplifiers and bass drums. The base is really heavy and will not fall over, even on carpet. All mechanisms work to stabilize and tighten the boom arm and the tripod stand. The quality is much better than I anticipated based on the price. These were a fantastic deal.

Seeing that this item has so little reviews, I couldn't help but purchase it myself to give my thoughts. Compared to the Gator mic mount, the InnoGear does the same exact thing at $13 less and with a much smaller footprint. Of course, the materials used are a bit less premium (no hard rubber handles), but the soft touch plastic is fine enough. The weight is hefty and feels great, and the cable management clips work well. I'm more fond of the unbranded look, so the InnoGear stand is perfect. 5/5 for me. edit (8/27/20): noticed that the threading from the base to the horizontal arm was stripped. The arm doesn't even tighten and just sits on the exposed diameter. Going to request a replacement, but will have to knock down the score by one for now. edit (9/1/20): replacement fixed the issue, could've been a QC thing.

Overall, this stand is a decent desktop microphone stand. It is very sturdy and will not tip over if you use it properly; microphone facing the direction of the weight. It is also very easy to adjust the height and length of the stand. It also conveniently comes cable holders to ensure you have an easier time managing those. The main problem I have with this stand however, is that it can not handle the weight of my mic at the stand's full length (see pic). After about 20 minutes of use, I will notice it is at half the height of what I originally set it at. I also make sure to tighten that joint to the best of my ability but the problem still occurs. I can only stop it my changing the length to a little over the halfway point. My microphone (AT2020) weighs 1.32 lbs for reference. This is something that would make my work a lot more convenient so I am lowering my rating due to this.

We are satisfied with the quality of the stands. If handled without over tightening while adjusting the stand, it should withstand steady use. The base is heavy enough to keep the mic stand from toppling. Overall we're happy with our purchase.

Coloqué un micrófono con su antipop y resiste perfectamente el peso. El tamaño es muy bueno para que el micrófono esté cerca de ti al hablar y sin tener que hacer agujeros o dañar tus muebles. La base es de espuma suave y aisla el ruido que pueda viajar por el suelo. Pros: es resistente, fácil de ajustar y súper estable Contra: no recomendado para estar ajustando a cada rato ya que se fija con los tornillos incluidos, no con una manivela como un tripie u otro mecanismo

للاسف مايثبت المايك مركب عليه مايك بود وكل ما ارفعة ينزل مع اني شاد عليه

Really happy with the stand. The base is weighty and removes any tilting risk.

Great product