A pack of screen protectors for the iPhone 13 Pro Max is a smart investment to keep your phone’s display scratch-free, smudge-resistant, and protected from accidental drops. Most high-quality options include multiple protectors, so you always have a spare. They’re ultra-thin, ensuring full touchscreen sensitivity, and many come with an easy installation kit to prevent air bubbles. The oleophobic coating helps reduce fingerprints, keeping your screen looking clean. ✅ Pros: Strong Tempered Glass: Protects against scratches and minor drops. Crystal Clear Display: Maintains brightness and color accuracy. Smooth Touch Sensitivity: Works seamlessly with gestures and Face ID. Easy to Apply: Most packs include an alignment frame for bubble-free installation. Multi-Pack Value: Extra protectors for replacements when needed. ⚠️ Cons: Can Crack on Hard Impact: The protector may break, but it saves your actual screen. Edges May Lift Over Time: If not installed properly, edges might peel. Final Verdict: A pack of tempered glass screen protectors for the iPhone 13 Pro Max is a must-have for everyday protection. With high clarity, strong durability, and easy installation, this is a great value option to keep your device safe from damage.

I bought my new iPhone 13 Max Pro about six months ago and, after researching many screen and lens protectors, chose to go with this one. An iPhone, as you know, is an incredibly expensive investment and it really needs to be protected so it can last a long time. When I received this kit, it came with three sets of each of the protectors, which is GREAT! I drive a box truck full time and it’s a bumpy, hard ride. There are times when my phone takes a bit of a beating during the day. Anything I can do to minimize damage to my phone is important. The camera lens protectors are very intuitive to install. Just make sure you clean the lenses prior to sticking in the protector. There are three, as I mentioned, so you have backup for a later date if you need to swap them out. Very cool! The screen protector was a bit tricky for me, only because I hadn’t had previous experience with them. They are hard and I have only had soft protectors in the past. So thank goodness there were three of them because, due to my ignorance, I had trouble installing the first two and threw them away thinking I only had one shot to get them in place (like with a soft protector). This was my mistake. If you place it off-center, you can simply slip your fingernail under the edge, lift it up and reset it. Lol Don’t throw it away, like I did. Use the included alcohol prep pad and wipe to clean your screen before putting on the protector. You want all of the dust and fingerprints off the screen because, once the protector is on, you can’t go back and clean it. Once cleaned, take one of the protectors out of the sleeve. There’s a green tab you can use to pull the film off the back. Make sure you don’t touch where the film was. This side goes against the screen. Pull the film off and use your fingertips to hold the edges. I recommend having the phone in front of you length-wise (sideways) and using two hands to center the protector on top of the screen. Be mindful that there is a small groove cut out on one end that aligns with the top of your screen. Align one edge with your phone and slowly lower the protector so it is even on the edges. The directions say to press in the middle but I found that it will start connecting with the screen on different places. If a bubble forms, simply lift the edge close to the bubble slightly to let the air out and press it down again. It’s easy to do this because it’s a hard protector. Just use small corrections, you don’t have to raise the protector up much, just a tiny bit to let the air out. I got the screen protector on and everything worked perfectly! It wasn’t as noticeable as I thought it would be. It also had NO effect on the touchscreen functions. It’s a great protector kit and works!!! After six months of daily use in a box truck, I began noticing small cracks and was worried that the cracks had gone through to my phone screen. I ordered another kit (because remember, being an idiot the first round, I had thrown out two of the protectors for no reason). I just peeled off my screen protector and I was AMAZED that, although the protector was cracked in many places, my phone screen was in PERFECT condition! Not even a little scratch or small dent. Nothing. Just like new. I took a picture and added it to show you the first protector and my phone screen. I just put my second protector on and it was easy to install! I learned after my first round last year. :) So please buy this if you care about your phone. It’s amazingly scratch resistant, the kit is awesome and generous with multiple back up protectors … and it works!

I drop my phone so many times on the daily that these camera protectors are a must. This is the second time buying these from this brand and they are good. I didn’t review the first time because I didn’t feel the need, but after reading the other reviews I needed to come give an accurate one. These are for the iPhone 13 pro max. They absolutely fit the phone and camera design, and are case friendly, meaning they don’t inhibit the use of your case which I have found to be accurate. They do not change the photo quality at all, you literally cannot tell that its there, and if you claim you can then I recommend you check to see if you put it on right (which is nearly impossible not to do since everything fits perfectly snug over the lenses and the hole punches/ indents line up perfectly). So I suggest you go back and see if you bought the right size for your phone because you genuinely cannot mess up the application. Which leads me to my next point of these being super user friendly. The divots in the lens protector line up perfectly to the lens itself. No adjusting or lining anything up, just slap it on. The adhesive is great, I have never had one fall off, even after shattering and falling apart, it stayed on until I took it off. I have shattered three already, but my camera is unscathed. I also saw someone mention that there was moisture under there’s, but there should be no gap between the protector and the lenses, so again, make sure you have the right model because I have dropped my phone in both rain and snow and have never had moisture under them. The only bad things I have to say are: they break fairy easily. The protector itself is pretty thick but the part that goes over your actual camera lens is thinner since they needed to cut out the glass so it actually fits where it should. I wouldn’t say they are fragile but I bought my iPhone 13 they day it launched, and I am on my fourth protector. I drop my phone at least 5 times a day as I am a content creator and am always on it, BUT my camera is intact and unharmed and it definitely wouldn’t be if I didn’t use these. And the second thing, they are fingerprint MAGNETS. They smudge and get greasy so easily from your hands which will mess up the camera quality. Ive had to stop recording at clean off my lens several times in the past, but now I am aware so I just give it a quick rub against my shirt before I snap that picture. Overall: 10/10 I will continue to buy these from this brand. They do exactly what they say they’re going to do and have saved my camera so many times. They DO fit the iPhone 13 PRO MAX snugly, so disregard the reviews saying otherwise. If you’re clumsy and don’t wanna repair the camera on your phone very month these are just as essential as the tempered glass screen protectors. Get it.

Excellent product. Can’t beat the price for 3 sets of protectors. Very easy to use.

Worked great

Muy buena calidad y resistencia.

Parfait

Schutzglas musste bei mir getauscht werden, da gesprungen, ohne wirklich harten Kontakt. Hatte vorher ein deutlich teureres Produkt. Montagerahmen und Schutzglas passen perfekt. Man muss sauber arbeiten und vorher Hände waschen. Ich musste das Glas nach der Montage nochmal komplett entfernen, da doch ein Fussel unter das Glas geraten ist. War kein Problem und der Fussel konnte mit dem Klebestreifen super gut entfernt werden. Danach nochmal mit dem Montagerahmen das gleiche Schutzglas montiert. Nun war alles perfekt. Blasenfreie Montage. Anleitung ist einfach zu verstehen. Vorher Staubwischen hilft, um nicht wie ich zweimal montieren zu müssen. Kameraschutz habe ich nicht montiert, da der noch vom teureren Anbieter drauf war. Sieht aber genauso hochwertig aus. Montiert wurde das Schutzglas auf ein iPhone 16 Pro.