Easy to install, clear video, great sensitivity, light is very bright.

These are excellent Ring Flood light cameras. I like that the Ring cameras were very easy to install. I also like that the RIng cameras were very easy to setup. These are very easy camera to replace your exitance flood lights. The RIng cameras comes with everything you need to install. I like that you can mount the RIng cameras on the wall or under your roof easement. I like that the cameras have excellent picture quality. I like that the cameras two-way audio. I like that the cameras have a siren to detour animals or humans. I like that you can register for a plan to save your video feed or skip the plan and only received live motion activity without saved videos.

This camera is amazing I got it a few days ago, very easy to install, function very well, very bright. The motion detector is on point. I'm very happy with my amta

RING Flood Cam Wire Plus review My order arrived sooner than scheduled. The support from RING has been excellent and they answer the phone 24/7. I chose the wired unit for reliability and a white one because of our Phoenix Arizona hot sun. I installed it vertically on the outside wall of my garage, about 8 feet from the floor of the driveway, facing my 2-car driveway and street. I ran a 3-wire round power cord from an AC outlet in the ceiling of the garage – about 15 feet to the wall. Measuring the location of where the unit is to be mounted is VERY important. I carefully calculated where the hole would be drilled through the exterior wall and stucco to the inside of the garage wall. I bought a 12” x 3/8” concrete drill bit and plastic 4” round box. The hole through the wall had to be reamed out a little for the power cord to easily get through the hole, a 7/16” or ½” bit would have been better. After drilling the hole through about 13” of stucco and wood for the extension cord, I cut the plug off and poked it through to the outside. I mounted the 4” plastic round box with long screws, stripped the cord and 3 wires and wired it up per instructions. The next morning, I discovered one of two tabs broke off on the plastic 4” round box and the unit was hanging with only the wire and the bottom tab. DO NOT USE A PLASTIC 4” Round Box. I bought a metal 4” round box and rewired and remounted the unit onto the wall. Be sure to use proper screws for mounting the 4” Round Box to the wall or surface. The unit is very heavy and there are only 2 tabs on the round box to attached it to whatever surface its being mounted on. The metal 4” Round Box with ½” threaded outlets comes with the screw plugs for the holes that will not be used. The panhead screws that came in the unit for mounting the metal bracket to the round box were too high and did not allow the unit to seal completely with the foam rubber gasket against the 4” round box. I used two Truss-head screws. Again, the unit is heavy, so be very careful when handling and mounting it. I sealed the 4” round box to the stucco wall with liquid nail to prevent rain from getting into the power cord and into the back of the unit. I painted round box and touched up the stucco. Now the functions and performance… I’m disappointed in the resolution of the image when zoomed in to enlarge the image of a person. The camera apparently does not have lenses, so the depth of field is very small. The feature to physically select the motion detect area is nice. The app is a little confusing to use but after playing with it, it’s works fine. The on-off selectable motion alarm is interesting. It has a recorded female voice that says “Hi, you are currently being recorded” when the motion detect is triggered. Overall, this unit is well worth the price and the time to install it. It has provided a nice level of comfort for added outside home security and links with my RING doorbell. I will know more about its environmental quality after a couple summers and rainy seasons. I subscribed to the Plus option for $100/year with video recording of all devices at home. I get shared neighborhood alerts on security issues that RING products detect which is nice to know what is happening around our area. Customer Feedback to RING: I suggest you revise your installation video to state to only use a Metal 4” Round Box and replace the panhead screws with a flatter head screw. Also, the resolution with a zoomed in image is very important for visual identification. Please improve this in future revisions of this product. I would pay extra for improved resolution.

Quality product. Took me about 15 minutes to install. So easy a chipmunk could do it. Bright led lights and high resolution video. Really enhances security.

After one month of service, I feel as though I can give an honest assessment of the overall performance of this camera. Admittedly I had high hopes for this device but over the last month, my hopes went from impressed to just OK. The install was fairly easy and it did set up perfectly the first time. The video quality is very good and the motion detection is very sensitive but after adjustments, works pretty good. The lights are bright at their brightest setting and can be dimmed to your preferred light level. About a week later, without warning, when I manually tried to turn the floodlight on or off, it would turn back on even with the motion detection turned off. The lights were basically on all-the-time. I ultimately had to perform a soft reset of the device by holding the button down for 20-seconds and subsequently had to reset the network settings. Worked good for another week before it started losing connection to the network. My second Ring device, which is located about 10-feet from this one, was working fine so I knew it wasn't due to the Wi-Fi quality. It lost connection and it would not reconnect, no matter what I did, even after performing the soft reset. What fixed it this time was having to turn off the circuit breaker for about a minute removing all power from the device an turning it back on. We will call this a hard reset. After setting everything back up again, It has been working pretty well. That was a week ago. What's funny is that the arm/disarm schedule did not work right after the initial installation but after the hard reset has been working fine. Software issue? Hardware issue? Not sure. My advice to you if you should decide to purchase this device is to install in in-line on/off switch if it is not already set up that way. That way you don't have to hit the breaker when you need to do a hard reset. You will just be resetting the Ring floodlight and not everything else on the circuit. That is what I did. The issues you are reading about in the other reviews are very much legit and I can attest to that. However, it is a pretty good security device and it works well when it works. We will see how long it works after the hard reset and perhaps, if everything works right, I might upgrade this review to a four-star rating. Stay tuned. UPDATE!! So far so good. A month after the hard reset, we are still working perfectly. I have upgraded my rating to four-stars! It is my guess that we had some kind of problem while adding the device in the app or some kind of connection issue. So far, I am very pleased with this unit.

My son just installed this equipment and finds it working great. Installation was east and design looks nice on garage area. battery is long lasting and surprised for the range of the camera. Good price and meets our needs.

The light is well made and it comes with easy to install instructions. After instillation the light was easy to set up and the picture quality is great!